Ruhrpumpen

Centrifugal Pumps Manufacturers

As leadingCentrifugal Pumps Manufacturers,Ruhrpumpenprovides a wide array of pumping technologies and solutions that go above and beyond to meet the diverse needs of numerous applications within the Oil & Gas, Chemical, Power, Water, and Industrial sectors.

RP’s centrifugal, reciprocating and specialty pumps are compliant with the most demanding industry standards such as: ISO, API, Hydraulic Institute and ANSI/ASME. In addition, Ruhrpumpen offers fire protection pumps and systems designed and manufactured to meet the latest NFPA standards.

Demystifying Overhung Pumps: A Comprehensive Guide

Introduction:悬臂式的泵是一种常见的离心聚氨酯mps widely used in various industries for their versatility and efficiency. These pumps offer numerous benefits, including compact design, high flow rates, and ease of maintenance. In this technical blog, we will delve into the world of overhung pumps, exploring their working principles, applications, design considerations, and maintenance practices.

  1. Understanding Overhung Pumps:Overhung pumps, also known as frame-mounted pumps or end-suction pumps, feature a single impeller mounted on an extended shaft, with its bearings located outside the pump casing. This design allows the impeller to overhang from the pump’s support structure, hence the name “overhung.” The shaft is supported by one or two bearings, depending on the pump configuration.Centrifugal Pumps Manufacturers
  2. Working Principles:Overhung pumps operate based on the centrifugal force generated by a rotating impeller. When the impeller spins, it creates a low-pressure zone at the center, causing fluid to enter the pump through the suction inlet. The fluid then passes through the impeller’s vanes, where it gains kinetic energy and pressure. Finally, the fluid exits the pump through the discharge outlet.
  3. Working Principles:Overhung pumps operate based on the centrifugal force g
  4. 应用程序:Overhung pumps find extensive applications across various industries, including:
  • Water supply and distribution systems
  • HVAC (Heating, Ventilation, and Air Conditioning)
  • Irrigation systems
  • Chemical processing plants
  • Petrochemical refineries
  • Pharmaceutical manufacturing
  • Food and beverage processing
  • Mining operations
  • Oil and gas industries
  1. Design Considerations:When selecting and designing overhung pumps, several factors must be considered:
  • Pump capacity and head requirements
  • Fluid properties, including temperature, viscosity, and corrosiveness
  • Suction conditions, such as NPSH (Net Positive Suction Head) available
  • System pressure and temperature limitations
  • Materials of construction to withstand the pumped fluid and environmental conditions
  • Efficiency and power requirements
  • Compliance with relevant industry standards and regulations
  1. Maintenance Practices:Proper maintenance is crucial to ensure the longevity and optimal performance of overhung pumps. Key maintenance practices include:
  • Regular inspection of bearings, seals, and impeller for wear and damage
  • Lubrication of bearings as per manufacturer’s recommendations
  • Alignment checks to ensure proper shaft alignment
  • Monitoring and adjustment of pump performance parameters, such as flow rate and head
  • Periodic cleaning and flushing of the pump to remove debris and prevent clogging
  • Replacement of worn-out components and seals

Conclusion:Overhung pumps offer a reliable and efficient solution for a wide range of fluid handling applications. Their compact design, ease of maintenance, and versatility make them a popular choice across industries. Understanding the working principles, design considerations, and maintenance practices of overhung pumps is essential for ensuring their optimal performance and longevity. By following proper installation, maintenance, and operational guidelines, users can harness the full potential of overhung pumps and achieve reliable fluid handling in their applications.

Mastering Between Bearing Pumps: An In-Depth Technical Guide

Introduction: Between bearing pumps, also known as split-case pumps, are a widely used type of centrifugal pump known for their high efficiency, robust design, and versatility. These pumps find applications in various industries, ranging from water supply and wastewater treatment to oil and gas production and chemical processing. In this technical blog, we will explore the working principles, applications, design considerations, and maintenance practices associated with between bearing pumps.

  1. Understanding Between Bearing Pumps:Between bearing pumps feature two bearings positioned on either side of the impeller, hence the name “between bearing.” The pump casing is horizontally split into two halves, allowing easy access to the impeller, bearings, and other internal components. The impeller is mounted on a shaft that is supported by the bearings, ensuring stable operation and minimizing shaft deflection.
  2. Working Principles:Overhung pumps operate based on the centrifugal force g
  3. Working Principles:Between bearing pumps operate based on centrifugal force, similar to other centrifugal pumps. The rotation of the impeller generates a low-pressure zone at the center, causing fluid to enter the pump through the suction inlet. The fluid then passes through the impeller, gaining kinetic energy and pressure, before being discharged through the pump’s outlet.
  4. 应用程序:Between bearing pumps are used in a wide range of applications, including:
  • Water supply and distribution systems
  • HVAC (Heating, Ventilation, and Air Conditioning)
  • Irrigation systems
  • Fire protection systems
  • Oil and gas production and transportation
  • Chemical and petrochemical processing
  • Power generation (cooling water, boiler feed, condensate extraction)
  • Municipal wastewater treatment
  1. Design Considerations:When selecting and designing between bearing pumps, several factors must be considered:
  • Pump capacity and head requirements
  • Fluid properties, including temperature, viscosity, and corrosiveness
  • Suction conditions, such as NPSH (Net Positive Suction Head) available
  • System pressure and temperature limitations
  • Materials of construction to withstand the pumped fluid and environmental conditions
  • Efficiency and power requirements
  • Compliance with relevant industry standards and regulations
  1. Maintenance Practices:Proper maintenance is essential for ensuring the longevity and optimal performance of between bearing pumps. Key maintenance practices include:
  • Regular inspection of bearings, seals, and impeller for wear and damage
  • Lubrication of bearings as per manufacturer’s recommendations
  • Alignment checks to ensure proper shaft alignment
  • Monitoring and adjustment of pump performance parameters, such as flow rate and head
  • Periodic cleaning and flushing of the pump to remove debris and prevent clogging
  • Replacement of worn-out components and seals

Conclusion:Between bearing pumps offer efficient and reliable fluid handling solutions across various industries. Their robust design, ease of maintenance, and high performance make them a popular choice for applications requiring high flow rates and moderate to high heads. Understanding the working principles,

Vertical Pumps: Unlocking Efficiency and Versatility in Fluid HandlingCentrifugal Pumps Manufacturers

Introduction: Vertical pumps are a specialized type of centrifugal pump that offers unique advantages in terms of space savings, installation flexibility, and operational efficiency. These pumps are widely used in industries such as water and wastewater, oil and gas, power generation, and chemical processing. In this technical blog, we will explore the working principles, applications, design considerations, and maintenance practices associated with vertical pumps.

  1. Understanding Vertical Pumps:Vertical pumps are designed to operate with their shaft in a vertical orientation, making them distinct from horizontal pumps. The impeller is submerged in the fluid being pumped, while the motor and drive unit are located above the liquid level. Vertical pumps can be of various types, including vertical turbine pumps, vertical mixed flow pumps, and vertical axial flow pumps.
  2. Working Principles:立式泵操作在同一离心ce principle as other centrifugal pumps. The impeller rotates, creating a low-pressure zone that draws fluid into the pump through the suction inlet. The fluid is then accelerated and discharged at high pressure through the pump’s outlet. The vertical orientation allows for effective handling of fluids with high viscosity, entrained solids, or corrosive properties.
  3. 应用程序:Vertical pumps find applications in a wide range of industries and fluid handling scenarios, including:
  • Municipal and industrial water supply and distribution systems
  • Irrigation and dewatering applications
  • Deep well pumping
  • Cooling water circulation in power plants
  • Oil and gas production and refining
  • Chemical processing and petrochemical industries
  • Wastewater treatment and sewage pumping
  • Mining operations
  1. Design Considerations:When selecting and designing vertical pumps, several factors should be considered:
  • Pump capacity and head requirements
  • Fluid properties, including temperature, viscosity, and corrosiveness
  • NPSH (Net Positive Suction Head) available
  • System pressure and temperature limitations
  • Materials of construction to withstand the pumped fluid and environmental conditions
  • Efficiency and power requirements
  • Pump layout and space constraints
  • Compliance with relevant industry standards and regulations
  1. Maintenance Practices:Proper maintenance is crucial for the optimal performance and longevity of vertical pumps. Key maintenance practices include:
  • Regular inspection of bearings, seals, and impeller for wear and damage
  • Lubrication of bearings as per manufacturer’s recommendations
  • Alignment checks to ensure proper shaft alignment
  • Monitoring and adjustment of pump performance parameters, such as flow rate and head
  • Periodic cleaning and flushing of the pump to remove debris and prevent clogging
  • Replacement of worn-out components and seals

Conclusion:Vertical pumps offer a reliable and efficient solution for various fluid handling applications, particularly when space is limited or unique installation requirements exist. Their vertical orientation and submerged impeller design make them versatile in handling fluids with different characteristics. Understanding the working principles, design considerations, and maintenance practices associated with vertical pumps is essential for ensuring optimal performance and longevity. By selecting, installing, and maintaining vertical pumps appropriately, industries can benefit from efficient and reliable fluid handling operations.

Magnetic Driven Pumps: Harnessing Efficiency and Safety in Fluid TransferCentrifugal Pumps Manufacturers

Introduction:Magnetic driven pumps, also known as mag-drive pumps, are a specialized type of centrifugal pump that offers significant advantages in terms of leak prevention, operational safety, and efficiency. These pumps are widely used in industries such as chemical processing, pharmaceutical manufacturing, and semiconductor production, where the containment and transfer of hazardous or sensitive fluids are critical. In this technical blog, we will explore the working principles, applications, design considerations, and maintenance practices associated with magnetic driven pumps.

  1. Understanding Magnetic Driven Pumps:Magnetic driven pumps employ a magnetic coupling to transmit torque from the motor to the impeller, eliminating the need for a mechanical shaft seal. The pump consists of two main components: a magnetically driven impeller assembly and a magnet assembly outside the pump casing. The magnets create a magnetic field that allows the torque to be transferred through the pump’s casing, thereby driving the impeller.
  2. Working Principles:Magnetic driven pumps operate based on the principle of magnetic coupling. The motor’s rotational energy is transmitted to the impeller assembly through a magnetic field. This design eliminates the need for a mechanical shaft seal, which is a potential point of leakage in traditional pumps. The sealed construction ensures that the pumped fluid remains contained within the pump, enhancing safety and preventing environmental contamination.
  3. 应用程序:Magnetic driven pumps find applications in industries that handle corrosive, toxic, or sensitive fluids. Common applications include:
  • Chemical processing and transfer of corrosive chemicals
  • Pharmaceutical manufacturing and drug synthesis
  • Semiconductor manufacturing and wafer fabrication
  • Oil refining and petrochemical industries
  • Electroplating and surface treatment
  • Waste treatment and handling of hazardous substances
  • Laboratory and research facilities
  1. Design Considerations:When selecting and designing magnetic driven pumps, several factors should be considered:
  • Fluid compatibility with the pump’s materials of construction
  • Temperature and pressure limitations of the pump and magnets
  • Efficiency and power requirements
  • Containment and safety features to prevent leakage
  • Compliance with relevant industry standards and regulations
  • Maintenance and accessibility for inspection and repairs
  1. Maintenance Practices:Proper maintenance is crucial for the optimal performance and reliability of magnetic driven pumps. Key maintenance practices include:
  • Regular inspection of magnets, impeller assembly, and pump casing for damage or wear
  • Lubrication of bearings, if applicable, as per manufacturer’s recommendations
  • Monitoring and adjustment of pump performance parameters, such as flow rate and head
  • Periodic cleaning and flushing of the pump to remove debris and prevent clogging
  • Replacement of worn-out magnets, bearings, and seals as necessary

Conclusion:Magnetic driven pumps offer a safe and efficient solution for fluid transfer applications where leak prevention and containment are paramount. By utilizing magnetic coupling technology, these pumps eliminate the risks associated with mechanical shaft seals and provide enhanced operational safety. Understanding the working principles, design considerations, and maintenance practices associated with magnetic driven pumps is crucial for selecting, installing, and maintaining these pumps effectively. By leveraging the benefits of magnetic driven pumps, industries can achieve reliable and secure fluid transfer operations while ensuring worker safety and environmental protection.

Unveiling the Power of Reciprocating Pumps: A Comprehensive Technical Guide

Introduction:Reciprocating pumps are a type of positive displacement pump that utilizes the reciprocating motion of a piston or plunger to transfer fluids. These pumps are known for their high-pressure capabilities, precision metering, and ability to handle a wide range of viscosities. In this technical blog, we will delve into the working principles, applications, design considerations, and maintenance practices associated with reciprocating pumps.

  1. Understanding Reciprocating Pumps:Reciprocating pumps operate by converting rotary motion into reciprocating motion, either through a piston or a plunger. The piston or plunger moves back and forth within a cylinder, creating alternating suction and discharge strokes. This reciprocating action allows for precise control over fluid flow and the generation of high pressures.
  2. Working Principles:Reciprocating pumps rely on positive displacement, meaning they displace a fixed volume of fluid during each stroke. During the suction stroke, the piston or plunger retreats, creating a low-pressure zone that draws fluid into the cylinder through an inlet valve. During the discharge stroke, the piston or plunger moves forward, pressurizing the fluid and forcing it out through a discharge valve.
  3. 应用程序:Reciprocating pumps are utilized in various industries and applications, including:
  • Oil and gas production and refining
  • Chemical processingCentrifugal Pumps Manufacturers
  • Power generationCentrifugal Pumps Manufacturers
  • Water treatment and desalination
  • Food and beverage processingCentrifugal Pumps Manufacturers
  • Pharmaceutical manufacturing
  • High-pressure cleaning and washing systems
  • Hydraulic systems
  • Metering and dosing applications
  1. Design Considerations:When selecting and designing reciprocating pumps, several factors should be considered:
  • Pump capacity and pressure requirements
  • Fluid properties, including viscosity and temperature
  • Material compatibility with the pumped fluid
  • Efficiency and power consumption
  • Valve design and reliability
  • Pulsation dampening and noise reduction
  • Compliance with industry standards and regulations
  1. Maintenance Practices:Proper maintenance is essential to ensure the longevity and optimal performance of reciprocating pumps. Key maintenance practices include:
  • Regular inspection of valves, seals, and pistons/plungers for wear and damage
  • Lubrication of moving parts as per manufacturer’s recommendations
  • Monitoring and adjustment of pump performance parameters, such as pressure and flow rate
  • Periodic cleaning and flushing of the pump to remove debris and prevent clogging
  • Replacement of worn-out components, such as valves and seals
  • Alignment checks to ensure proper operation of pistons/plungers and connecting rods, if applicable

Conclusion:Reciprocating pumps offer a robust and reliable solution for various fluid handling applications, especially those requiring high pressures and precise metering. Their positive displacement nature allows for accurate control over fluid flow, making them suitable for a wide range of viscosities and pressures. Understanding the working principles, design considerations, and maintenance practices associated with reciprocating pumps is crucial for selecting, installing, and maintaining these pumps effectively. By harnessing the power of reciprocating pumps, industries can achieve efficient fluid transfer and precise dosing operations in diverse applications.

Decoking Jet Water Pumps: A Key Solution for Efficient Industrial Decoking Processes

Introduction:Decoking jet water pumps play a vital role in industrial processes that involve the removal of coke deposits from equipment such as heaters, boilers, and furnaces. These specialized pumps utilize high-pressure water jets to dislodge and remove coke deposits, ensuring optimal performance and longevity of equipment. In this technical blog, we will explore the working principles, applications, design considerations, and maintenance practices associated with decoking jet water pumps.

  1. Understanding Decoking Jet Water Pumps:Decoking jet water pumps are specifically designed to deliver high-pressure water streams for effective coke removal. They are typically reciprocating or plunger-type pumps capable of generating extremely high pressures required to dislodge coke deposits. These pumps are equipped with specialized nozzles and spray systems that create focused, high-velocity water jets to break up and flush away coke deposits.
  2. Working Principles:Decoking jet water pumps operate based on the principle of high-pressure water jetting. Water is drawn into the pump and then pressurized by a reciprocating piston or plunger. The pressurized water is then directed through a system of nozzles or spray headers, which generate focused water jets with enough velocity and force to effectively remove coke deposits from the equipment’s internal surfaces.
  3. 应用程序:Decoking jet water pumps are primarily used in industries that involve processes prone to coke deposition, such as:
  • Oil refineries
  • Petrochemical plants
  • Power generation facilities
  • Steel mills and foundries
  • Cement plants
  • Industrial boilers and furnaces
  1. Design Considerations:When selecting and designing decoking jet water pumps, several factors should be considered:
  • Pump capacity and pressure requirements based on the specific decoking process and equipment being cleaned
  • 材料兼容性与所使用的水nd any chemical additives
  • Nozzle design and selection for optimal jetting performance
  • Pump construction and seals to withstand high pressures and potential abrasive particles in the water
  • Control systems for precise water pressure and flow control
  • Safety features to protect operators and equipment during operation
  1. Maintenance Practices:Proper maintenance is essential to ensure the reliable and efficient operation of decoking jet water pumps. Key maintenance practices include:
  • Regular inspection of pump components, including seals, valves, and nozzles, for wear and damage
  • Lubrication of moving parts as per manufacturer’s recommendations
  • Monitoring and adjustment of pump performance parameters, such as water pressure and flow rate
  • Cleaning and flushing of the pump to remove debris and prevent clogging
  • Replacement of worn-out components, including seals, valves, and nozzles, as necessary
  • Adherence to maintenance schedules and manufacturer’s guidelines for routine maintenance tasks

Conclusion:Decoking jet water pumps are indispensable tools for effective and efficient coke removal in industrial processes. By utilizing high-pressure water jets, these pumps can dislodge and remove coke deposits from equipment, ensuring optimal performance and minimizing downtime. Understanding the working principles, design considerations, and maintenance practices associated with decoking jet water pumps is crucial for selecting, installing, and maintaining these pumps effectively. By employing decoking jet water pumps, industries can enhance the longevity and performance of their equipment while minimizing maintenance costs and improving overall operational efficiency.

Fire Pumps: Safeguarding Lives and Property with Reliable Fire Protection SystemsCentrifugal Pumps Manufacturers

Introduction:消防泵在消防方面起到至关重要的作用systems, providing the necessary water flow and pressure to extinguish fires efficiently. These specialized pumps are designed to deliver large volumes of water at high pressures, ensuring an adequate water supply for firefighting operations. In this technical blog, we will explore the working principles, applications, design considerations, and maintenance practices associated with fire pumps.

  1. Understanding Fire Pumps:Fire pumps are centrifugal pumps specifically designed for fire protection systems. They are typically driven by electric motors or diesel engines and are capable of delivering high flow rates and pressures to overcome the hydraulic losses in fire sprinkler systems, standpipes, and fire hydrants. Fire pumps are typically categorized as either horizontal split-case pumps or vertical turbine pumps.
  2. Working Principles:Fire pumps operate based on the principle of centrifugal force. The impeller rotates rapidly, creating a low-pressure zone that draws water into the pump through a suction inlet. The water is then accelerated and discharged at high pressure through the pump’s outlet, supplying the fire protection system with the required water flow.
  3. 应用程序:Fire pumps are a crucial component of fire protection systems in various buildings and facilities, including:
  • Commercial buildings, such as offices, shopping malls, and hotels
  • Industrial facilities, including manufacturing plants and warehouses
  • Residential complexes, such as apartment buildings and condominiums
  • Healthcare facilities, such as hospitals and clinics
  • Educational institutions, including schools and universities
  • Data centers and server roomsCentrifugal Pumps Manufacturers
  • Airport terminals and hangarsCentrifugal Pumps Manufacturers
  • Power generation facilities and substations
  1. Design Considerations:When selecting and designing fire pumps, several factors should be considered:
  • System requirements, such as flow rate, pressure, and duration of operation
  • Compliance with relevant codes and standards, such as NFPA (National Fire Protection Association) guidelines
  • Pump capacity and redundancy for reliable operation
  • Type of driver (electric motor or diesel engine) based on availability and backup power considerations
  • Adequate suction supply, including water sources and proper suction pipe sizing
  • Material selection to ensure corrosion resistance and longevity
  • Testing and certification requirements
  1. Maintenance Practices:Regular maintenance is essential to ensure the proper functioning of fire pumps. Key maintenance practices include:
  • Regular inspection of pump components, including seals, bearings, and impellers, for wear and damageCentrifugal Pumps Manufacturers
  • Lubrication of bearings and other moving parts as per manufacturer’s recommendations
  • Testing and calibration of pressure gauges, flow meters, and other monitoring devices
  • Checking and exercising valves to ensure proper operation and prevent sticking
  • Regular testing of the pump system, including flow tests and full-load tests, to verify performance
  • Scheduled maintenance of the driver, whether it’s an electric motor or diesel engine
  • Documentation and record-keeping of maintenance activities for compliance purposes

Conclusion:Fire pumps are essential elements of fire protection systems, providing the necessary water flow and pressure to suppress fires effectively. Understanding the working principles, design considerations, and maintenance practices associated with fire pumps is crucial for designing and maintaining reliable fire protection systems. By ensuring the proper selection, installation, and maintenance of fire pumps, we can safeguard lives and property, minimizing the devastating effects of fires and enhancing overall fire safety.

Combitube Pump: Enhancing Efficiency and Versatility in Fluid Transfer

Introduction:Combitube泵是一种通用的和创新的年代olution for fluid transfer applications, offering unique advantages in terms of efficiency, flexibility, and ease of use. This dual-function pump combines the capabilities of both a diaphragm pump and a centrifugal pump, allowing for efficient handling of various fluids, including solids and slurries. In this technical blog, we will delve into the working principles, applications, design considerations, and benefits associated with Combitube pumps.

  1. Understanding Combitube Pump:The Combitube pump is a hybrid pump that integrates the features of a diaphragm pump and a centrifugal pump into a single unit. It consists of a central shaft driven by a motor, with two concentrically arranged pumping elements surrounding the shaft. The inner diaphragm pump handles low-viscosity fluids, while the outer centrifugal pump deals with higher viscosity fluids and solids.
  2. Working Principles:利用disti Combitube泵运行nctive working principles of both diaphragm and centrifugal pumps. The inner diaphragm pump generates suction and discharge by the reciprocating motion of a diaphragm, which creates a pulsating flow suitable for low-viscosity liquids. The outer centrifugal pump, on the other hand, uses centrifugal force to accelerate and discharge fluids with higher viscosity or solids through its impeller.
  3. 应用程序:Combitube pumps find applications in a wide range of industries and fluid transfer processes, including:
  • Chemical processing and transfer
  • Pharmaceutical manufacturing
  • Food and beverage production
  • Mining and minerals processing
  • Waste management and wastewater treatment
  • Construction and tunneling operations
  • Marine and offshore applications
  • Oil and gas exploration and production
  • Agriculture and irrigation systems
  1. Design Considerations:When selecting and designing Combitube pumps, several factors should be considered:
  • Compatibility with the fluid being transferred, considering viscosity, particle size, and chemical compositionCentrifugal Pumps Manufacturers
  • Flow rate and pressure requirements for optimal performance
  • Material selection for pump components based on fluid compatibility and corrosion resistance
  • Power and motor requirements
  • Installation considerations, including space availability and mounting options
  • Ease of maintenance and access to pump components for cleaning and repair
  1. Benefits:Combitube pumps offer several advantages compared to traditional pumps, including:
  • Versatility: Ability to handle a wide range of fluids, including liquids with solids and slurries, eliminating the need for multiple pump types.
  • Efficiency: Optimized pump design and utilization of both diaphragm and centrifugal pump principles lead to efficient fluid transfer and reduced energy consumption.
  • Reliability: Robust construction and precise engineering ensure reliable operation and extended service life.Centrifugal Pumps Manufacturers
  • Flexibility: Adjustable flow rates and pressure settings enable customization to specific application requirements.Centrifugal Pumps Manufacturers
  • Maintenance-friendly: Ease of access to pump components simplifies maintenance, cleaning, and repair tasks, minimizing downtime.Centrifugal Pumps Manufacturers

Conclusion:Combitube pumps offer a unique and efficient solution for fluid transfer applications, combining the functionalities of diaphragm and centrifugal pumps into a single unit. Their versatility, efficiency, and flexibility make them well-suited for handling a wide range of fluids, including those with solids and slurries. Understanding the working principles, applications, design considerations, and benefits associated with Combitube pumps is crucial for selecting, installing, and maintaining these pumps effectively. By leveraging the advantages of Combitube pumps, industries can enhance fluid transfer efficiency, improve process reliability, and achieve optimal performance in diverse fluid handling applications.


RP India
Plot No. G-33 SIPCOT Industrial Park
Vallam Vadagal, Sriperumbudur Taluk
Kachipuram District
Tamil Nadu,
India – 602105

+91 44 3322-9900

https://www.ruhrpumpen.com/en/


You may also be interested in this manufacturer of Stainless Steel Silo Manufacturers

Mabel Engineers

Facebook twitter reddit pinterest linkedin mail

One thought on “Ruhrpumpen

Leave a Reply

Your email address will not be published.Required fields are marked*